Antistatic Chemicals & Coatings

NLA
ONLY 1/4 gal
.9L

Desco Paint, Statguard Conductive Epoxy, Light Grey

* Conductive Epoxide Polymer Floor Coating
Provides a flooring surface that does not generate a static charge and will act as
part of the path-to-ground for an operator wearing ESD footwear.

* Conductive (Rtt and Rtg 1 x 104 to < 1 x 107 ohms per ANSI/ESD STM7.1 or IEC 61340-4-1)
The surface resistance range will remain low enough to act as a path-to-ground with normal
dirt and grime build-up on a floor and meet the required limits of ANSI/ESD S20.20
(< 1 x 109 ohms) for a footwear / flooring system.

* One Coat, 2-part, Water-Based Epoxy System
Mix 4 gallon pre-measured part A and B together and install with squeegee and nap roller.

* 50% Solids by Volume
Reduces dry time. Estimated Coverage Per Gallon = 200 sq. ft. at 8 mil (0.008" thick).SAMPLE ONLY FOR TEST

* Made in the United States of America

DES10400 Sample-TDS.